China Hot Sale Dq554 55HP 4WD Agricultural Wheel Farm Tractor Small Mini Compact Graden Tractors with ISO Ce Pvoc Coc Certificate From Tractor Factory Manufacturer pto shaft bolt

Item Description

Sizzling sale Dq554 55HP Four wheel drive Agricultural Wheel Farm Tractor Little Mini Compact Graden Tractors with ISO Ce Pvoc Coc Certificate From Tractor Manufacturing facility Manufacturer


Tractor Primary Characteristics and Positive aspects: 
1. Outfitted famous brand name engine demonstrating innovative capacity, reduced fuel intake and high economic efficiency. 
two. Streamlined appearance layout, gorgeous and generous. 
three. Transmission Situation adopt meshed change and incorporate the gearbox interlock device can make the procedure a lot more easily, reliable and less difficult. 
4. Double action clutch with disc spring, execute steadily and effortless to work. 
5. Entirely hydraulic steering system drastically diminished driver’s operate power. 
six. Damp disc brake gadget, dependable brake functionality. 
7. Different injection of hydraulic oil, trustworthy to run. 
8. The lifter with pressure and placement adjustment, with dependable elevate. 
9. Tractor PTO: 
PTO in Double pace: 540/1000, 760/one thousand, 540/760r/min Optional, For higher working performance. 
PTO shaft of 6 or 8 spline Optional, adaptable for agricultural products of all more than the entire world. 

ten. Complete series light-weight, ROPS, Sunshade/Canopy, Enthusiast/Heater/Air-conditioned cabin are all offered, for a lot more relaxed driving atmosphere. 

Tractor Main specificaiton and Technical parameters: 

Tractor Model DQ554
Push variety 4X4
Engine
Variety of motor Xinchai 4-Cylinder Diesel motor
Capability of gasoline tank(L) 38L
Motor power at rated velocity 40.5kw / 55HP
Rated pace (r/min) 2400
Transmission
Clutch Dry, dual-phase kind
PTO pace 540/1000rpm or 540/760rpm
Equipment change 8F+4R/8F+8R/12F+12R (Optional)
Hydraulic system
Hydraulic output valve 2-Way (optional)
Three stage linkage
Category of 3-stage website link Rear, category II
Lifting force (at stage of 610mm)KN twelve
Technical parameter
Overall size (L x W x H)mm 3513X1750X2130
Wheel base (mm) 2040
The smallest clearance (mm) 325
Front tire 8.3-20
Rear tire 12.4-28/14.9-24 (optional)
Optional Configurations
ROPS, Canopy(Sunshade), Cabin with Supporter/Heater/Air-problem, 2-Group Hydraulic output valve, Front ballast, Rear ballast, Air brake, 8F+8R/12F+12R Shuttle gearshift, Paddy tire, 14.9-24 huge rear tire, Swing draw bar. 

DQ554 55HP Four wheel drive Tractor information: 

DQ554 55HP 4wd Tractor have different Configurations, Attachments, Implements for choose


Progress Manufacutring Line: 

Strictly Inspecting and Entire Testing for making sure large top quality item: 

Tractor Packing, Loading container and Offering merchandise to Consumers: 

Ideal right after-sale support for each Distributors and Private clients: 

Best value will be quoted for you as shortly as get your Requirement! 

Shipping Cost:

Estimated freight per unit.



To be negotiated

###

After-sales Service: Factor Directly Supply
Warranty: 2 Years
Type: Wheel Tractor

###

Samples:
US$ 7200/set
1 set(Min.Order)

|

Order Sample

###

Customization:

###

Tractor Model DQ554
Drive type 4X4
Engine
Type of engine Xinchai 4-Cylinder Diesel engine
Capacity of fuel tank(L) 38L
Engine power at rated speed 40.5kw 55HP
Rated speed (r/min) 2400
Transmission
Clutch Dry, dual-stage type
PTO speed 540/1000rpm or 540/760rpm
Gear shift 8F+4R/8F+8R/12F+12R (Optional)
Hydraulic system
Hydraulic output valve 2-Way (optional)
Three point linkage
Category of 3-point link Rear, category II
Lifting force (at point of 610mm)KN 12
Technical parameter
Overall size (L H)mm 3513X1750X2130
Wheel base (mm) 2040
The smallest clearance (mm) 325
Front tire 8.3-20
Rear tire 12.4-28/14.9-24 (optional)
Optional Configurations
ROPSCanopy(Sunshade), Cabin with Fan/Heater/Air-condition, 2-Group Hydraulic output valveFront ballastRear ballast, Air brake, 8F+8R/12F+12R Shuttle gearshift, Paddy tire, 14.9-24 big rear tire, Swing draw bar. 
Shipping Cost:

Estimated freight per unit.



To be negotiated

###

After-sales Service: Factor Directly Supply
Warranty: 2 Years
Type: Wheel Tractor

###

Samples:
US$ 7200/set
1 set(Min.Order)

|

Order Sample

###

Customization:

###

Tractor Model DQ554
Drive type 4X4
Engine
Type of engine Xinchai 4-Cylinder Diesel engine
Capacity of fuel tank(L) 38L
Engine power at rated speed 40.5kw 55HP
Rated speed (r/min) 2400
Transmission
Clutch Dry, dual-stage type
PTO speed 540/1000rpm or 540/760rpm
Gear shift 8F+4R/8F+8R/12F+12R (Optional)
Hydraulic system
Hydraulic output valve 2-Way (optional)
Three point linkage
Category of 3-point link Rear, category II
Lifting force (at point of 610mm)KN 12
Technical parameter
Overall size (L H)mm 3513X1750X2130
Wheel base (mm) 2040
The smallest clearance (mm) 325
Front tire 8.3-20
Rear tire 12.4-28/14.9-24 (optional)
Optional Configurations
ROPSCanopy(Sunshade), Cabin with Fan/Heater/Air-condition, 2-Group Hydraulic output valveFront ballastRear ballast, Air brake, 8F+8R/12F+12R Shuttle gearshift, Paddy tire, 14.9-24 big rear tire, Swing draw bar. 

PTO Shafts and PTO Shaft Shields

When choosing a PTO shaft, measuring the various pieces is an important aspect. Each piece must be measured in a specific way, with the shaft in a closed position. Measure the length between the outsides of the yokes. The closed length will help you determine the correct PTO series size for the horsepower of your tractor.

540 rpm

Shaft CollarA 540 RPM PTO Shaft will fit CZPT PTO models. These shafts are slightly indexed to allow for easy PTO drive hookups. These shafts will also work with 1000 RPM implements. They also feature a snap ring that will allow for quick and easy removal.
PTO shafts are commonly divided into two types: 1000 RPM and 540 RPM. The 540 RPM PTO shafts are smaller, with only six splines, while the 1000 RPM PTO shafts are larger. The 540 RPM version is used with implements that require less horsepower and are made for light-duty use.
The PTO shaft transfers power from the tractor’s engine to a PTO-driven implement. When operating at its recommended speed, the PTO shaft rotates at 540 rpm (9 times per second). The higher speed PTO shafts have more splines.

Safety chains

Safety chains for PTO shafts are an important safety feature to consider when operating a tractor. These chains are welded to the drive end of a tractor or implement. They are used to prevent the plastic shield from spinning on the PTO shaft. The chain’s reaction time is slower than the speed of the PTO shaft, which makes it important for safety.
When operating a tractor, it is important to follow the manufacturer’s instructions and keep the machine and equipment in a safe location. A poorly-guarded PTO can entrap ground personnel or cause a serious accident. Operator awareness is also important. It is important to avoid stepping over a revolving shaft, wearing loose clothing, or making repairs while the tractor is running. It is also important to follow the manufacturer’s instructions and use the PTO for its intended purpose.
The safety chains for PTO shafts must be properly connected and fully functional before each use. During a PTO operation, the PTO shaft may rotate as much as 1000 rpm, which is potentially deadly. In addition to safety chains, the tractor should have a clutch or torque limiter fitted on the implement end.
The PTO shaft must have a correct length for the machine. If it is a sliding metal PTO drive shaft, it is important to lubricate it according to manufacturer’s specifications. Lubrication is recommended after every eight hours of operation. Also, make sure that the button on the end of the PTO shaft moves freely. Hammering it into place can damage the guard and the shaft.
A PTO driveline hazard is one of the oldest farm machinery hazards. It refers to the PTO or Implement Input Connection. There are often protruding pins and bolts on the driveline, which can snag clothing.

Shield

Shaft CollarThe PTO shaft shield is a protective piece that encloses a PTO shaft. These shields are usually plastic, but some are also made of metal. They are made to protect the PTO shaft from debris, which can cause premature wear and damage to the universal joints. A PTO shaft shield is not a permanent fixture, but can be easily removed for replacement or repair.
The PTO shaft shield should be checked periodically to ensure that it is in good condition. It should have no loose ends or loose bolts. Ensure that the shear bolts and pins are the right length and hardness for the PTO shaft. Additionally, the operator should wear snug clothing to avoid stepping on the PTO shaft while working.
The PTO shaft shield should fit snugly over the PTO shaft. If the PTO shaft is loose, it may be difficult to attach the safety shield. However, with a proper PTO shaft shield, the process should be quick and easy. A CZPT safety clip allows easy removal and prevents co-rotation between the inner driveshaft and the safety shield. The driveline safety shield from RPM Transmissions is made of CZPT, which is a rigid and durable material.
In addition, some machine drive shafts are lacking a shield. This can cause a safety hazard. Without a PTO shaft shield, an operator may accidentally touch the shaft and get injured. These guards prevent this danger by enclosing the shaft in a plastic or metal guard.
The PTO shaft shield is a crucial part of tractor safety. It helps protect the operator from accidental entanglement while operating the tractor. When the PTO shaft stub becomes separated, it can cause severe injuries and even fatalities. Thankfully, the industry has made tremendous progress in reducing the risks associated with PTO mishaps. Operators must make sure they maintain the shields and do not remove them if not in use.

Reverse rotation

Shaft CollarThe PTO shaft reverse rotation mechanism prevents the main drive shaft from moving in a direction opposite to the direction of rotation of the driven shaft. The mechanism is compact, reducing the length of the rotation shaft. The mechanism includes two reversing members: first reversing member 151 rotates in a clockwise direction and second reversing member 153 rotates in a counterclockwise direction.
In a PTO shaft reverse rotation mechanism, a driven shaft is inserted into a hollow cylindrical body. It is rotatably positioned relative to the main driving shaft 112 and radially symmetrically around it. As a result, the driving and reverse-rotation mechanisms are symmetric.
One such PTO shaft reverse rotation mechanism has a main drive shaft and a driven shaft, and a plurality of transmission units coupled to it. The driven shaft and the transmission member rotate in tandem. The transmission units are arranged radially about the main driving member and the driven shaft. Alternatively, one of the reversing units may comprise the second reversing member and the first driving member.
China Hot Sale Dq554 55HP 4WD Agricultural Wheel Farm Tractor Small Mini Compact Graden Tractors with ISO Ce Pvoc Coc Certificate From Tractor Factory Manufacturer     pto shaft boltChina Hot Sale Dq554 55HP 4WD Agricultural Wheel Farm Tractor Small Mini Compact Graden Tractors with ISO Ce Pvoc Coc Certificate From Tractor Factory Manufacturer     pto shaft bolt
editor by czh 2023-01-08